Victron Orion-Tr Smart 12V 30A DC-DC Charger with Pre-Crimped Leads

This is a complete Split charge DC – DC Kit

If you have a smart alternator, start/stop technology, or regenerative braking then you will need to buy a Battery to Battery (DC to DC) charging system.  This kit features the Orion-Tr Smart 12/12-30A (360W) Non Isolated DC-DC charger (ORI121236140).

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.

The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

 

This is a complete set pre crimped and ready to be installed

Your kit will come supplied with the following:

• Orion-Tr Smart 12/12-30A (360W) Non-Isolated DC-DC charger x1
• Battery Cable – Hi Flex Single PVC 110amp – 16mm² – Black (For Ground)
• Battery Cable – Hi Flex Single PVC 110amp – 16mm² – Red (At chosen length – Starter Battery to Orion)
• Battery Cable – Hi Flex Single PVC 110amp – 16mm² – Red (2.5m From Orion to Leisure Battery)
• Set of Battery Terminals
• Victron Fuse holder for MIDI-fuse x2
• Victron MIDI-fuse 80A/32V
• 16mm² Copper Tube Terminals 8mm² holes
• Crimp Terminals