Victron Camper Electric Kit With DC charging 110AH AGM 12v Blade Fuse Board (EMCAMPER5)

Victron Camper Electric Kit With DC charging 110AH AGM 12v Blade Fuse Board (EMCAMPER5)

Victron Camper Electric Kit with DC charging and 110Ah AGM 12v Blade fuse board.

The perfect Victron Energy camper electric setup for van conversions with just 12v loads. This kit charges with the Victron Cyrix battery combiner voltage sensing relay whilst driving or running the engine.

110Ah Victron AGM The leisure battery is a Victron Energy 110Ah (M8) AGM battery that is much higher quality than cheaper sealed lead-acid batteries. The Victron AGM is a VRLA (Valve Regulated Lead Acid) technology which means that gasses will escape through safety valves only if the battery is overcharged or there is a cell failure.

Cycle Life – The Victron AGM is capable of 400 cycles down to 80% DOD, 600 cycles down to 50% DOD or 1500 cycles at 30% dod.

12v Blade Fuse board with GND and cover is the Bluesea 5026 which is one of the most commonly used campers electric fuse boards.

Full protection from over-discharging and damaging your AGM battery. This kit includes a Victron Smart Battery Protect 65amp which is fully configurable to open a relay at your preferred voltage and able to protect your 12v loads from draining you battery down to a damaging voltage – this device is critical in a system that is running 12v loads.

Full technical support supplied by one of the UK’s leading Victron Energy camper kit specialists. For more information on Camper van electric kits, please feel free to contact us directly to discuss your requirments.